Design/Maching Question square cornered Vcarve

[NickB]

I'm doing a Dollhouse door that has recessed rectangular panels. I'm cutting defining the panels using the 60 degree VCarve bit, following a rectangle of the desired shape with a quick engrave, of a depth to leave the panels the proper size.

Is there a way to make the corners of the VCarve come out square instead of curved.

I'm sure there must be a way, But I'm really hoping I won't have to discover it by experimentation.:confused:

Thanks in advance

[zeykr]

On a profile toolpath choose Sharp Internal corners, you may have to scroll to see the corners tab:

[Joe Porter]

http://forum.vectric.com/viewtopic.php?f=2&t=17788&p=125531&hilit=sharp+internal+corners#p125458 This is on the Vectric Forum and may be of help to you...joe