CRV3D to shopbot file

[matney_models]

Is there a way to run a CRV3D file on a shopbot?

[myxpykalix]

As with any file created in any program it needs to be turned into a toolpath. You can only run toolpaths on the shopbot control software.

If you have a file that needs to be made into a toolpath maybe someone with that program could do that for you.:confused:

[adrianm]

A CRV3D file is a Vectric Aspire file. You would need to load it into Aspire and save the toolpaths using the ShopBot Post Processor.

[matney_models]

I done not have Vcarve Pro. All I have is what ShotBot give you

[srwtlc]

Kevin, what is the file for? If it contains any copyrighted relief models or other stuff, you're out of luck. If it doesn't, then one of us with Aspire could help you out.