NickA
04-17-2015, 01:38 AM
We have been getting into gardening this spring in our new house. I just finished up a project to build raised beds. I'm posting a few pictures here, but the full work up is on my blog:
http://nick-aschenbach.github.io/blog/2015/04/13/building-a-custom-machined-raised-bed/
24795247962479724799
24800
I used a 1/4" 2-flute spiral down tool. I found that I got better results when conventional cutting. The 4" x 4" posts were quite wet, but the cutting results were okay. All in all it was a fun project and hopefully we'll be enjoying the fruits of our labor in a few months!
https://www.youtube.com/watch?v=b4Hyl-paMj4
http://nick-aschenbach.github.io/blog/2015/04/13/building-a-custom-machined-raised-bed/
24795247962479724799
24800
I used a 1/4" 2-flute spiral down tool. I found that I got better results when conventional cutting. The 4" x 4" posts were quite wet, but the cutting results were okay. All in all it was a fun project and hopefully we'll be enjoying the fruits of our labor in a few months!
https://www.youtube.com/watch?v=b4Hyl-paMj4