PRS Standard Buddy 32 Q's

[harryball]

I have a few questions about the newest rendition of the PRS Standard Buddy 32.

1) Can the Buddy 32 hold a 48" indexer setup on the 4' power stick?

2) What is the approx. max turning diameter if the indexer is mounted directly on the power stick? (i.e. no table)

3) Does anyone have photos of an indexer setup on the Buddy they'd be willing to share?

4) Has anyone designed an under the table vac setup for the newest buddy with the plywood table? photos?

5) Have you had any problems with the plywood table not being stable? If so, how have you addressed these?

6) Are their any issues running the Buddy 32 with the 48" powerstick? i.e. needs out riggers, not stable etc...

Thanks,
/RB

[Brady Watson]

Call SB Monday.

-B

[harryball]

FYI,

I was told the Buddy does not support an indexer at all.

As I'd suspected and hoped, with the 48" power stick there is not a real stability issue unless you work on something really heavy and off center.

I'd still be interested in comments/photos on the other questions by buddy owners.

/RB

[Brady Watson]

Robert,
You have mail.

-B