Built In Bookcase

[Keith Larrett]

A recent job designed using eCabinets and cut on the ShopBot via the eCabinets ShopBot Link. Built with 3/4" alder plywood and solid alder. Doors are MDf, edgebanded with alder and veneered.

Client wanted clean, simple lines. She was very happy with the final product.

[Tim Lucas]

Looks great!!

is that your popup pin for flip ops in pic 4 ?

Tim

[Keith Larrett]

Looks great!!

is that your popup pin for flip ops in pic 4 ?

Tim

Thanks Tim! Hope you are keeping well.

"Pop up pins" might be a generous description :D but yes, those are my X and Y fences. I make them oversize and then just trim them with the CNC so they run along X=0 and Y=0. They slide out the way once I have put the sheet on the table. They need replacing every know and then as I have a bad habit of forgetting to slide them out of the way before running a file :rolleyes: