Creating a live edge in Aspire- can't find the thread

[GeneMpls]

I have a bit of time in the fall/winter so I thought I would prepare some
samples of the bark and wood grains in the clipart collection. Some one
posted a 'kinda' how to put a live edge on an existing board. I have been
attempting it with some success but would like to look at the thread now.
I know I bookmarked it but like everything else... I can't find it. Anyone
know of what I speak? Thanks Gene

[Brady Watson]

Let me Google that for you... (http://lmgtfy.com/?q=Creating+a+live+edge+in+Aspire) ;););)

First result under the videos...

-B

[Austin Shafer]

Let me Google that for you... (http://lmgtfy.com/?q=Creating+a+live+edge+in+Aspire) ;););)

First result under the videos...

-B

That was the first time I have seen that before lol Awesome!

[GeneMpls]

26378
Let me Google that for you... (http://lmgtfy.com/?q=Creating+a+live+edge+in+Aspire) ;););)

First result under the videos...

-B

You are too kind (if a little bit snarky)- it is actually this shopbottalk thread I was looking for. And I spent quite a bit of time looking and googling. This is how far I have progressed- I wanted to see how he (Mezalick) did it to tune up my procedure.

[Brady Watson]

Did you get the info you were looking for? Or need help looking? (seriously)

-B

[mezalick]

Gene,
Here's the link to the Vectric forum topic about my live edge.
http://forum.vectric.com/viewtopic.php?f=29&t=20437&p=144609&hilit=live+edge#p144609

Let me know if you need more info.
Michael
mm@mezalick.com

[GeneMpls]

Did you get the info you were looking for? Or need help looking? (seriously)

-B

I did Brady- I am on a lot of boards and this one is the most civil. I understand that knowledgeable people get tired of us ankle-biters asking the same questions over and over- I have the
same reaction in some situations where I have a certain amount of knowledge. I wondered after I posted the 'snarky' comment if I had gone too far but hoped it would be taken as humor.
I have learned a lot from you and all of the fine people on this board since I bought my first 32" Buddy three years ago and look forward to much more knowledge. Thanks Gene

[Brady Watson]

Gene,
No worries. I am not thin skinned. I don't take offense easily.

The world doesn't need any more of the victim mentality.

However, I do break a friend's stones once in a while... ;) - I'm glad you're a good sport.

-B