PDA

View Full Version : PVC and laminated board



bleeth
11-09-2015, 12:14 PM
I have:

20 sheets white 1/2" PVC
5 sheets black 1/2" PVC
20 sheets 3/4mdf with Wilsonart Gunstock walnut 1 side white liner other side
8 with Formica Wild Cherry 1 side gloss white other
9 with Mahogany 1/side white liner other (not sure who's mahogany but will get down from rack and check if someone wants.

Pick-up only my shop Delray Beach.
Reasonable offers will be accepted.

Also: 25HP 3PH older Comp-Air screw compressor. $2500.00
It's buried in a corner so I don't have a pic. Horizontal 80 Gallon tank. This puppy isn't quiet and needs a new outlet valve at bottom but works great. I used it daily in our finish shop before I moved to smaller place. Last serviced by Comp-Air authorized repair a few months before I took it out of service.

PM or e-mail.

Dave

bleeth
11-09-2015, 12:41 PM
Too late to edit: The compressor has a 120 Gal tank.
Here is a link to a video of a somewhat newer one but they look alike except for the color (mine is green) and mine is 220 3PH
https://www.youtube.com/watch?v=YAItriaqvL8