Source for 5/16" x 3/4" Nylon Screws?

[nat_wheatley]

Need some to fasten my spoilboard down. Thanks

[ron_moorehead]

Not sure if you want bolts or screws, you can check them out they have store nation wide: www.fastenal.com
I have gotten nylon screw from them in the past.

[nat_wheatley]

Hi,

Have bolts now, looking to switch to screws. Just looked through Fastenal site, just saw grub head screws in that size, need something like a pan head. Thanks

[myxpykalix]

go to your local hardware store and buy a bunch of nylons screws/bolts that is used to hold toilet seats down. I did this once years ago. Others have reported that when using nylon screws/bolts the mdf has a tendency to pucker up in the middle(?)

[Greybarn]

I found mine at our local hardware store.

[knight_toolworks]

I use regular screws I just use the machine to mark where they are so I can remove them later.

[nat_wheatley]

Thanks, I'll look locally.

[tlempicke]

Bought an Omer nail gun and a box of Raptor nails a while back and it is really neat. Fast and secure. When you have the parts cut out just give the pieces a whack sideways and they come loose.
Raptor nails, being plastic cut quite nicely so if you get one in the path of the bit, no problem.
Lots of talk here on the forum in the past if you search.