need help in laying out a 3d file

[gibl5s]

I am laying out a sign and I have 2- 3d files in it. one in material setup the model position in material I want flush with the top and the other model I want it to be .3 under or below the top or surface. Now how do I do this? It seems that i can only make one setting in the setup mode.
Thanks for your help.
gibl5s

[myxpykalix]

Not sure what pgm you're using but one suggestion i'd make is this. Lets say your sign is square.
Make a vector outline of your project.
place 3d file #1 in it's place and create your file
save it
make your toolpaths
make another copy of that file and place 3d file #2 in it's place within the vector box
set your depth to what you want.
create a vector outline of that file
delete all the other parts from copy1 and save it
create toolpaths

So what you are doing is making 2 copies of your project but only saving the toolpath for the 2nd 3d object.
That allows you to cut both files at different depths....

[gibl5s]

thanks so much for your help!!!
Not sure what pgm you're using but one suggestion i'd make is this. Lets say your sign is square.
Make a vector outline of your project.
place 3d file #1 in it's place and create your file
save it
make your toolpaths
make another copy of that file and place 3d file #2 in it's place within the vector box
set your depth to what you want.
create a vector outline of that file
delete all the other parts from copy1 and save it
create toolpaths

So what you are doing is making 2 copies of your project but only saving the toolpath for the 2nd 3d object.
That allows you to cut both files at different depths....