Ajcoholic
04-13-2016, 07:47 PM
Hi,
Just a simple project but I use these all the time in the shop and thought I'd share. Its my version of a table saw push stick, based on the plastic one I got with my Sawstop saw in 2010, but a little longer handle. I find the angles and so forth just right.
I cut these on my Shopbot with the vacuum hold down, and no tabs. But, would be easy to tab and/or hold down with clamps or screws.
Here is the file in a .DXF file so I can attach it. I use 12mm Baltic Birch.
Andrew
http://i83.photobucket.com/albums/j307/ajcoholic/ajcoholic022/IMG_1386_zpsqlnep7uv.jpg (http://s83.photobucket.com/user/ajcoholic/media/ajcoholic022/IMG_1386_zpsqlnep7uv.jpg.html)
Just a simple project but I use these all the time in the shop and thought I'd share. Its my version of a table saw push stick, based on the plastic one I got with my Sawstop saw in 2010, but a little longer handle. I find the angles and so forth just right.
I cut these on my Shopbot with the vacuum hold down, and no tabs. But, would be easy to tab and/or hold down with clamps or screws.
Here is the file in a .DXF file so I can attach it. I use 12mm Baltic Birch.
Andrew
http://i83.photobucket.com/albums/j307/ajcoholic/ajcoholic022/IMG_1386_zpsqlnep7uv.jpg (http://s83.photobucket.com/user/ajcoholic/media/ajcoholic022/IMG_1386_zpsqlnep7uv.jpg.html)