Mayo
05-06-2016, 02:36 PM
These things only happen when work has to get done... (see my post in troubleshooting)
Looks like one motor is gasping it's last breath-
Looking for reasonably good working PK296A1A-SG7.2 for my X axis on a PRT48x96 with 4G upgrade. New would be great but used will do.
I've already checked Oriental Motor's web site and the delay in shipping is too long for the job I have to finish.
I've called and left a message with Shopbot and are waiting for a call back, so I thought I would see if anyone here has some gathering dust from doing upgrades.
Looks like one motor is gasping it's last breath-
Looking for reasonably good working PK296A1A-SG7.2 for my X axis on a PRT48x96 with 4G upgrade. New would be great but used will do.
I've already checked Oriental Motor's web site and the delay in shipping is too long for the job I have to finish.
I've called and left a message with Shopbot and are waiting for a call back, so I thought I would see if anyone here has some gathering dust from doing upgrades.