Shopbot control board + Dual Vee wheels PRT PARTS

[bob_dodd]

Shopbot control board V3.54 , PRT 032104-02256 4 Channels working with 2 cards , this has just been used in a stand alone indexer , Channel X1 is not working , that leaves 4 Channels
Included also is 3 replacement chips + serial to USB and USB cable
This board is hard to find these days

8 used dual vee wheels in good condition 3/8" ID PRT
3 new dual vee wheels 3/8" ID PRT
8 eccentric adjustable bushings
2 standard bushings

$100.00 + $20.00 shipping contact sawdust47@msn.com
http://www.talkshopbot.com/forum/attachment.php?attachmentid=28579&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=28580&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=28581&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=28582&stc=1

[bob_dodd]

OK The Dual Vee wheels and bushings have sold , that leaves
Shopbot control board PRT X1 channel not working , have 3 ic chips for board, 2 cards (1 installed on board and 1 loose ) , 1 serial to USB cable , 1 USB cable as pictured above $65.00 shipping included to lower 48 states
contact by PM or sawdust47@msn.com

[bob_dodd]

Sold thanks