frank.phillips
08-05-2016, 04:55 PM
I purchased this machine a few years ago for a prototyping and low-volume manufacturing business. Ran exclusively by me, the owner of the business/ machine. The machine has been amazing - cuts very cleanly and quick! Fortunately, things have gone so well and business has grown large enough that I now need a machine with a bit higher tolerances and speed, so I'm upgrading - ouch the cost of the next step up is crazy. I'd like to have this machine out of the shop pretty quickly as space is of the utmost importance in my small shop and the new machine shows up next week (I had to keep this machine running right up until the new machine moves in! and now it's going to be too crowded to work with both machines in there.)
5' x 12' PRT
4G Controller with low hours
twin router set up
Effepizetta 5hp vacuum pump hold down with six zones
2016 Laptop housed in a dust controlled cabinet.
Dust collection system and dust skirt available
I think that the machine is worth $10K - but I'm motiveated to move it quickly - Make me an offer!
Located in the Denver, Colorado area
Give me a shout - Frank @ (303)842-3473 or franktpw@gmail.com
286822868328684
5' x 12' PRT
4G Controller with low hours
twin router set up
Effepizetta 5hp vacuum pump hold down with six zones
2016 Laptop housed in a dust controlled cabinet.
Dust collection system and dust skirt available
I think that the machine is worth $10K - but I'm motiveated to move it quickly - Make me an offer!
Located in the Denver, Colorado area
Give me a shout - Frank @ (303)842-3473 or franktpw@gmail.com
286822868328684