steve_g
01-12-2017, 09:25 PM
Here’s an unusual project we were asked to do for a local cabinet shop… It’s a hand washing basin for a kosher kitchen. The cabinet shop routinely sends us customers who want something different.
I spent way too much time trying to figure out vectors from the paper plans we were given. I finally determined that I didn’t have enough information! When I finally got the DXF files I was able to figure it out.
The stand is alternating maple and cherry laminations and the cabinet shop glued up the panels for us to cut the parts from.
SG
http://www.talkshopbot.com/forum/attachment.php?attachmentid=29527&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=29528&stc=1
I spent way too much time trying to figure out vectors from the paper plans we were given. I finally determined that I didn’t have enough information! When I finally got the DXF files I was able to figure it out.
The stand is alternating maple and cherry laminations and the cabinet shop glued up the panels for us to cut the parts from.
SG
http://www.talkshopbot.com/forum/attachment.php?attachmentid=29527&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=29528&stc=1