Anyone on here own their own sawmill?

[gundog]

I am considering buying a sawmill for some projects on my small ranch and I have been wanting to get into custom carved wood signs. I would like to be able to make my own slabs for signs. I am looking at buying a manual band saw mill. Prices are all over the place for these things the ones I am looking at run between $5K and $10K. I am not sure how good a mill I need to produce some nice slabs. I am not looking for production turning out a lot of board feet an hour. I know I could just buy the slabs from someone but that is not my style plus I want to build some projects around my place and I have access to some logs. I would also like to mill a bunch of maple I have into a nice maple floor for my house. I have been looking at mills from Timber King, Wood-Mizer, Norwood & Woodland Mills. What do you have or have been around?

The Woodland mill is the cheapest for what you get but it is not as nice as some of the others.

Mike

[fredtoo]

I can't help you with a recommendation but I would own one in a 'New York minute' if I were younger.

[myxpykalix]

We have a Wood Miser. But in addition to the bandsaw mill you will need a bobcat to lift the logs onto the mill. There are some mills that are ground level but you have to gorilla the log onto the rails, you have to manually turn the log. With the woodmizer it will turn the logs for you (depending on model, i think). Save your money up and get a good brand that will do alot of the work for you because i promise it will save to lots of pain and aggrivation.
There is also a bit of science to cutting logs that you should study up on. See if there is any woodworking shows coming to your area so you can go see one in action, or a dealer closeby.
There is definitely something special about cutting into a log and discovering some beautiful grain...good luck

[steve_g]

Mike…
We don’t own our own mill, but have seen many in use… One vender has a log-master, one a wood-miser another a homemade 60” mill!

What I’ve seen is that any mill can get you good lumber, but you need an operator who cares and understands your goals! A maladjusted mill that is climbing and diving through the log is just creating headaches, a blade with one bent tooth is wasting a lot of good lumber! No matter what size mill you buy, it’ll be to small soon enough! Buy the largest you can swing!

Jack made a good point about the Bobcat… wet logs are heavy!

Even more important, how are you going to dry it? We made a very successful solar kiln, but the logs we’re getting lately are too long for it… we’re paying .50 per bd ft per month for drying while our own kiln sits empty. :(
SG

[gundog]

I did not mention it but I have a #5000 forklift and a tractor with a loader and backhoe with a thumb. Moving the logs won't be a problem I also have a barn with pallet racking for wood storage. I may need to fashion some sort of kiln for drying.

[Tim Lucas]

We owned a Woodmizer , sold it to get the CNC but will buy another Woodmizer with hydraulics. They have a place on their website to list used mills

I would Not buy any other brand and I would not buy without hydraulics.

Tim

[guitarwes]

This past December I talked a buddy of mine into buying a TimberKing. He bought the basic $7900 model. I like the way these are constructed with the large A-frame head. The Woodmizers have the cantilever head and I just can't get past that these will more than likely wear quicker and produce a slanted cut.
Earlier last year, another buddy and me almost went in together and ordered a 2400 Timberking to go along with his landscaping/tree business. This would be a great machine to have for small production but couldn't justify it in the long run especially since I have lots of side jobs already.

[tri4sale]

This past December I talked a buddy of mine into buying a TimberKing. He bought the basic $7900 model. I like the way these are constructed with the large A-frame head. The Woodmizers have the cantilever head and I just can't get past that these will more than likely wear quicker and produce a slanted cut.
Earlier last year, another buddy and me almost went in together and ordered a 2400 Timberking to go along with his landscaping/tree business. This would be a great machine to have for small production but couldn't justify it in the long run especially since I have lots of side jobs already.

Wish I had a buddy I could talk into buying something like that!

[cradke0419]

I have a Norwood mx34. Nice machine. I owned a smaller Norwood before with only a 13hp engine and smaller cut . We upgraded to a bigger machine with a 23hp within 2 years. Still not enough power in my opinion. Grew up with a circle mill on the farm. I hear the circle hatch marks are coming back. I would say whatever you buy make sure it is not under powered. I have heard good things about woodmizer and timberking as well. We send out our lumber to be dried by someone else and also air dry some

[Brian Harnett]

I use an Alaskan chainsaw mill, fine for cutting slabs for furniture but not for siding a house.

I have a friend with a nice hydraulic woodmizer for when I need large quantities. He has had it for at least 20 years.

Another friend has a Hud-Son basic model it workes ok but has a manual carriage they start around 5000

[Ron Barnes]

Checkout procut sawmills out of canada. I'm in process of making one using the Stihl 600 saw. I currently use a 36" Alaskan mill that allows me walk into the places I can't drive and cut but the procut will allow me to cut lumber and beams. Also look at a swiss company called logosol, They have some nice stuff and Baileys in California is a dealer for them. Just remember that your saw will need a ripping chain, It cuts just as nice if not better than a bandsaw and my bar won't walk over a hard knot if I'm cutting hardwood as some bandsaws do.

[danhamm]

I had a Norwood 2000 for a few years sold it, last year I bought a woodlands 126 love it.