View Full Version : Help Finding Trupan
Austin Shafer
04-20-2017, 01:49 PM
Hello All,
Can anyone point me in the right direction to find 5'x12' trupan ultralight MDF? Nowhere local to me can get it.
Kyle Stapleton
04-20-2017, 02:15 PM
If you have a big republic blower you do not need trupan or ULDF.
Austin Shafer
04-20-2017, 02:57 PM
If you have a big republic blower you do not need trupan or ULDF.
Could I just use lighter MDF then?
jerry_stanek
04-20-2017, 06:11 PM
I have used both the light is not as good as Trupan but a lot better than regular MDF
Kyle Stapleton
04-20-2017, 08:31 PM
We use LDF with our two Feins.
Works well for most applications.
Austin Shafer
04-21-2017, 10:02 AM
We use LDF with our two Feins.
Works well for most applications.
What do you think of this? Which one would work best?
http://www.richwoodind.com/composite-panels/2-uncategorised/73-customwood.html
bleeth
04-21-2017, 06:44 PM
The differences between different ULDF's is quite minimal.
They all work better than mdf and difficult to tell the difference in practice from each other.
curtiss
04-21-2017, 08:08 PM
You might try Schaller Hardwoods, they have lots of different items.
http://schallerhardwood.com/
Austin Shafer
04-24-2017, 05:50 AM
Thanks for the help! I have contacted a few places and am awaiting responses.
Austin Shafer
04-27-2017, 06:31 AM
Well, having trouble finding 5'X12' sheets of LDF even..... Just found this website this morning though, its ultralight trupan. https://www.plywoodcompany.com/MainSite/Store1/StoreProducts/ProductDetail/4513
bleeth
04-27-2017, 07:28 AM
You can piece together 5 x 12 from 4 x 8's etc also-Not a big deal.
Austin Shafer
04-27-2017, 07:36 AM
I thought about this also.
Ken Sully
04-27-2017, 09:26 AM
Don't know if this helps, but they have a large selection. Located in Kansas and Iowa. Finally something good about living in Iowa!! Very few CNC guys, at least Shopbot.
http://libertyhardwoodsinc.com
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.