Profile cut Leads not processing

[pyrodenis]

Hi All,
Using Aspire, I'm using Leads for a profile cut On a curvy line, but they are not ending up in the toolpath.
Anyone?
THNX

[srwtlc]

You need to adjust the parameters for the lead in/out form. If the settings are out of range, it won't place the leads and you will get a message stating that "One or more leads were clipped or removed". Try changing the radius and or lead length. Also, make sure leads are checked on.

[Gary Campbell]

Are your leads on an open or closed vector? They may not work as expected on open vectors, you will have to add them manually.

[pyrodenis]

Are your leads on an open or closed vector? They may not work as expected on open vectors, you will have to add them manually.

Open. That's the problem. Thnx Gary