steve_g
04-20-2018, 12:00 PM
Wonder what it would take to get a 2018 show-&-tell folder…
Here’s a bar stool I was commissioned to make to match a previous step stool purchase… The original request was for a welded metal base, I used these inexpensive IKEA legs to let her try height and footrest combinations, unfortunately, she fell in love with the look… I’m not sold on it!
She wanted two live edges like her step stool… first “sit-down” convinced her I was right; the front edge should be smooth!
I made the curved seat by extruding an arch across the pecan blank using a VCP molding tool-path.
I matched the rung ends to the leg diameter with a spindle sander and attached them with 3M VHB tape… I had thought that that the VHB was a temporary “proof-of-concept” attachment, but it’s not coming apart without destroying it!
Does anyone have any long-term experience with VHB wood to metal attachment?
SG
Here’s a bar stool I was commissioned to make to match a previous step stool purchase… The original request was for a welded metal base, I used these inexpensive IKEA legs to let her try height and footrest combinations, unfortunately, she fell in love with the look… I’m not sold on it!
She wanted two live edges like her step stool… first “sit-down” convinced her I was right; the front edge should be smooth!
I made the curved seat by extruding an arch across the pecan blank using a VCP molding tool-path.
I matched the rung ends to the leg diameter with a spindle sander and attached them with 3M VHB tape… I had thought that that the VHB was a temporary “proof-of-concept” attachment, but it’s not coming apart without destroying it!
Does anyone have any long-term experience with VHB wood to metal attachment?
SG