SolidWorks 3D files into VCarve engraving files or 3D roughing and finishing files

[DHP56]

I have a SolidWorks CAD file with surfaces that are not flat that I would like to carve on my PRS Alpha using either VCarve engraving or the 3D roughing and finishing files. I don't know how to go about getting the SW surfaces into a file format that can be used to cut those surfaces in VCarve and the subsequent SBT cutting files. Any help would greatly appreciated. Thanks.

[EricSchimel]

Your best bet would be to export from Solidworks as an STL and bring it into Aspire if you have access to it. I believe you can do a single STL in VCarve if that's all you need.