Desktop 18x24 Sale

[LeoT97]

Shopbot Desktop: It has a slotted Aluminum bed with Spoil board attached. The table is 24"x18" with a 5.5" cutting height. Vacuum attachment and cover brush head. It is powered by a 1 Hp 110 Spindle and has variable speed control. It is just under 4 years old and was not in constant use. Used to complete a few projects or Christmas gifts. I purchased it to develop rough outs for relief woodcarving, but find the amount of time to create the Aspire pattern could just as easily be spent doing it by hand. Plus I wouldn’t have the stigma of machine done (Not meant to offend anyone). Here is my wood carving web page to show why I don’t need this machine (www.CarvedByLeo.com (http://CarvedByLeo.com)). Here is everything that is included:

Shopbot Desktop 2014
Collets additional sets for different diameter burs
Wrenches
Starter set CNC burs, plus some extras
Plus: Digitizing Probe attachment (https://www.shopbottools.com/mProducts/accessories.htm)
Basic Windows 7 Toshiba laptop Shopbot Software installed

Here is the info Shopbot offers for the style of machine I have:
https://www.shopbottools.com/mProducts/basicPRSsystems.htm#edPackages

$6,000. for local pickup Will deliver within 8 hr drive of Greenville, NC. For $400. 32474

[LeoT97]

Willing to negotiate "fair price" or drop add on items. -LeoT97

[rcnewcomb]

Your carvings are beautiful.

[LeoT97]

Thank you for checking them out!

[scottp55]

I agree with Randall about your carvings! Beautiful!
IF you aren't going to keep the Aspire, and it is going with the machine...I would DEFINITELY mention that as it is a huge plus(also mention Version of Aspire).
As mentioned in the other thread Lots of pics with the machine cleaned up will help.
Also as mentioned it really hasn't been up that long.
Perhaps keeping machine in running order, and offering a few hours of basic training will help also.
scott

[LeoT97]

Thanks for the feedback - The machine is in great shape. I was told by ShopBot to run the spindle warm up every so often to keep it in good running order - which I do. Its located in my Carving Studio that has temperature control so it doesn't sit in heat or too cold. I would have to negotiate regarding Aspire separate than the machine. Definitely can take less than posted price. Get in touch I can make this a sweet deal

[scottp55]

Sorry Leo....I already have one (and for a while 2), and Love it!
Was just mentioning to help sale.
scott

[LeoT97]

Sold thank you!