Burkhardt
02-25-2019, 10:13 PM
I posted that in the Vectric forum already, but I thought my project came out quite nice and I guess not everybody here is on that forum. Please ignore if you have seen it already.
If somebody is interested interested in the .dwg and VcarvePro files and some instructions have a look here (http://www.tailmaker.net/step-stool.html) (there are other new projects as well with free files).
This is a simple step stool that I made as an improved copy of a very old handmade piece. Rather quick 2-sided project, this took me less than 2 days for prep, cutting, assembly, sanding and finish. No real 3d-tool paths but several "moulding tool paths" for the bevels.
32543
32542
If somebody is interested interested in the .dwg and VcarvePro files and some instructions have a look here (http://www.tailmaker.net/step-stool.html) (there are other new projects as well with free files).
This is a simple step stool that I made as an improved copy of a very old handmade piece. Rather quick 2-sided project, this took me less than 2 days for prep, cutting, assembly, sanding and finish. No real 3d-tool paths but several "moulding tool paths" for the bevels.
32543
32542