WaltzWorks
08-18-2020, 08:41 AM
We used this 24x36 machine for a side business, but with me back in school that is pretty much done.
The machine works well from what I can tell. It has the plastic sides, which are beat to hell.
The aluminum deck has a few cuts in it from my early days.
Includes the CNC machine, power cord, dust hose, and the few bits I have laying around (mostly 1/4" spirals and a spoil board bit)
I'll include the table I have it on, which is Rockler angles with an MDF top and wheels on it.
I'll add pictures if there's any interest.
If you would like my Vectric VCarve Pro 9.0 ShopBot Edition license, we can contact Shopbot about a transfer.
I'd like to get $6000 for it.
The machine works well from what I can tell. It has the plastic sides, which are beat to hell.
The aluminum deck has a few cuts in it from my early days.
Includes the CNC machine, power cord, dust hose, and the few bits I have laying around (mostly 1/4" spirals and a spoil board bit)
I'll include the table I have it on, which is Rockler angles with an MDF top and wheels on it.
I'll add pictures if there's any interest.
If you would like my Vectric VCarve Pro 9.0 ShopBot Edition license, we can contact Shopbot about a transfer.
I'd like to get $6000 for it.