PRT Indexer Post Processor for Aspire

[waynelocke]

I need an indexer post processor for Aspire which wraps the Y Axis. The one I have says it will wrap either the X or Y but there seems no place to choose the axis. I have not used the rotary since Aspire 10.5 and I am feverishly trying to get a job out. Help!

[srwtlc]

Hey Wayne, see if one of these works for ya.

https://www.shopbottools.com/files/Rotary%20Indexer%20Post%20Processors%20for%20V-Carve%20and%20Aspire.zip

[waynelocke]

I can’t open those now but if they came from the shopbot website they are all for indexers with tool changers.

[srwtlc]

If you don't have a tool changer, it should proceed manually with prompts. I've got old versions going way back and I don't see one specifically for "Wrap Y" in the PostP/Wrapped/Shopbot folder. You could also edit the one for X to use Y instead.