JBell
11-25-2022, 07:44 PM
I’ve done it the same way countless times with no issues.
Now, when the bit lands on the zeroing plate, the spindle head growls for a moment and the machine shuts down. The monitor reads “Stopping…” then “Tool Stop Button On” when nobody touched it. I’ve rebooted everything a dozen times, cleaned all the contacts I could think of but nothing seems to work.
Any of you wonderful people out there have any ideas?
Thanks.
Now, when the bit lands on the zeroing plate, the spindle head growls for a moment and the machine shuts down. The monitor reads “Stopping…” then “Tool Stop Button On” when nobody touched it. I’ve rebooted everything a dozen times, cleaned all the contacts I could think of but nothing seems to work.
Any of you wonderful people out there have any ideas?
Thanks.