kamen
12-21-2006, 10:36 AM
Instaled SB version 3.4.27 and have next problems:
During file cutting z axis moves approx -20mm without interrupting cutting process.
The problem is not in the file since I cut the same one many times a day.
The noice and the results are owful
I notised too that JH and custom commands
are displayed with C# simbols in Command bar.
If somebody have some suggestions, it will be very helpfull
During file cutting z axis moves approx -20mm without interrupting cutting process.
The problem is not in the file since I cut the same one many times a day.
The noice and the results are owful
I notised too that JH and custom commands
are displayed with C# simbols in Command bar.
If somebody have some suggestions, it will be very helpfull