JDRoberts
04-02-2023, 06:37 PM
2013 PRS Alpha
Set up currently as 48"X52" Have parts to make a full 48"X96" you will need v-rail and pinion rack. (About 500 bucks)
1.7KW HSD Spindle, low hours, runs great. Shopbot pendant, about 2K in bits, and accessories. All cutting was either HDU, foams or HDPE plastic at .1 deep. So, no hard abuse or mass production on machine.
12K obo, will do partial trades if it's interesting.
In Mesa AZ, local pick up only
35263 35264
jdrdesignsaz at the g mail
Set up currently as 48"X52" Have parts to make a full 48"X96" you will need v-rail and pinion rack. (About 500 bucks)
1.7KW HSD Spindle, low hours, runs great. Shopbot pendant, about 2K in bits, and accessories. All cutting was either HDU, foams or HDPE plastic at .1 deep. So, no hard abuse or mass production on machine.
12K obo, will do partial trades if it's interesting.
In Mesa AZ, local pick up only
35263 35264
jdrdesignsaz at the g mail