RobertsLuthiery
05-14-2023, 11:38 AM
I want a 6” indexer for my PRSalpha Buddy and am struggling to afford the $3,800 for a new unit from the fine folks at Shopbot Tools. I plan on using the indexer for a class I will be teaching on making guitar necks using a rotary indexer.
I’m a retired engineer and am pretty confident that I can put together my own unit from a few custom parts and an off the shelf Orientalmotor closed loop geared stepper motor and Orientalmotor ARD-A driver adapted to fit a stock Chuck and tail stock. The problem is there are many versions of the closed loop steeper motor and ARD-A driver and I can’t afford to buy the wrong one.
Can anyone out there with a 6” alpha indexer please share the model numbers for their driver and and motor? I’ll be more than happy to reciprocate with any advice when needed.
I’ve written an email to Gary Campbell but unfortunately he never responded.
THANKS IN ADVANCE FOR ANY HELP!
I’m a retired engineer and am pretty confident that I can put together my own unit from a few custom parts and an off the shelf Orientalmotor closed loop geared stepper motor and Orientalmotor ARD-A driver adapted to fit a stock Chuck and tail stock. The problem is there are many versions of the closed loop steeper motor and ARD-A driver and I can’t afford to buy the wrong one.
Can anyone out there with a 6” alpha indexer please share the model numbers for their driver and and motor? I’ll be more than happy to reciprocate with any advice when needed.
I’ve written an email to Gary Campbell but unfortunately he never responded.
THANKS IN ADVANCE FOR ANY HELP!