Steelnstone
11-22-2025, 02:20 PM
8 Foot x 4 Foot x 6 inches cutting area (6 3/4” clearance under bridge)
Machine was ordered new March, 2006 and used lightly in a pattern shop
Upgraded X and Y axis motors and rail package installed (2007)
Steel Table set up for vacuum hold down, Vacuum pump and ducting not included
Spoil board on entire table, in good usable condition, vacuum compatible. Vacuum system has been removed.
5 HP HRP High Speed (max. 24,000 rpm) Spindle Motor
6 position automatic Tool Changer with 6 tool cones and misc. collets
(Spindle package was a$16,999.00 addition)
3phase converter for spindle power is included. Machine is ready to run.
Includes Dell Precision T3500 computer, Monitor, and computer stand
All manuals and some training literature is included
The machine is set up and operating for demonstration of working condition
Final software set up of machine specific parameters and tool changer coordinates is needed
Photos and Video available of spindle motor running and machine making a square pattern and making a 12” circle pattern
Invoice price new was $29,385 (w/o vacuum pump). See photo for original invoice.
Asking $6000 open to offers
Located in Central Minnesota 56301
Machine was ordered new March, 2006 and used lightly in a pattern shop
Upgraded X and Y axis motors and rail package installed (2007)
Steel Table set up for vacuum hold down, Vacuum pump and ducting not included
Spoil board on entire table, in good usable condition, vacuum compatible. Vacuum system has been removed.
5 HP HRP High Speed (max. 24,000 rpm) Spindle Motor
6 position automatic Tool Changer with 6 tool cones and misc. collets
(Spindle package was a$16,999.00 addition)
3phase converter for spindle power is included. Machine is ready to run.
Includes Dell Precision T3500 computer, Monitor, and computer stand
All manuals and some training literature is included
The machine is set up and operating for demonstration of working condition
Final software set up of machine specific parameters and tool changer coordinates is needed
Photos and Video available of spindle motor running and machine making a square pattern and making a 12” circle pattern
Invoice price new was $29,385 (w/o vacuum pump). See photo for original invoice.
Asking $6000 open to offers
Located in Central Minnesota 56301