PDA

View Full Version : Input switch problem


shadow521
06-23-2006, 10:15 AM
I have been using a shopbot at my work for about a month now and my boss decided to move the shopbot to a different spot in the shop. After the move i hooked everything back up correctly but when I try to move the bit it says "STOP SWITCH IS ON" and there is a box around the number 4 under input switches. I have tried VN to turn it off but nothing is happening. Anybody that can help i would appreciate it.

Aaron
richards
06-23-2006, 10:30 AM
Aaron,
The emergency stop switch on my machine 'locks' on when it is pressed. As a safety measure, it has to be twisted to release.
shadow521
06-23-2006, 10:57 AM
Well damn i feel like a dumbass that did it mike thank you for the help.
richards
06-23-2006, 01:33 PM
Aaron,
I only knew how to fix it because it happened to me too.
gerald_d
06-23-2006, 02:04 PM
Me too (an automated garbage truck, Germany, 1993)
mikejohn
06-24-2006, 01:44 AM
And me!

...........Mike
3d_danny
06-24-2006, 09:51 AM
and me......

Its just part of the learning curve!

Dan