PDA

View Full Version : General Comments


emily
11-10-2003, 11:18 AM
is there a manual??????
paul_nielsen
11-10-2003, 01:37 PM
Look at: http://www.shopbottools.com/download.htm
tlempicke
12-23-2003, 07:28 AM
This comes under the heading of "Well Duhh!"

We have been having a problem with our depth. I mounted a dial indicator on the Z carriage and it is always within .001 of where it should be.

Finally figured out that we had never set the thickness of our Z Zero plate when we installed the new software.
simon
08-26-2004, 06:57 PM
Hi Everyone.
Is there a setting on SB3 that turns OFF the creation of a text report? I find these extra files are irritating and largely unnessesary.

Simon
bill.young
08-26-2004, 07:51 PM
Hey Simon,

Yep. Type VD...[V]alues [D]isplay if you would rather click on the menu... and turn off "Write Part File Logs".

Bill
fleinbach
08-27-2004, 08:12 AM
The latest Prtalpha ver 3.2.16 appears to require updating of the firmware. I tried it without and the Z axis only moved up. Installing firmware corrected it.