1/8" CED bit 3/4" long

[roy@shimpsigns.com]

Can anyone recommend a 1/8" CED bit with a CEL of about 3/4" for cutting 1/2" pvc. I like onsrud's 62-712 for cutting 1/2" pvc, but it is not quite long enough and leaves a "shoulder mark" just under the top edge.

[srwtlc]

Roy, I've had good luck with ones from MSC. 1/8" CED, 3/4" length, 1-1/2" OAL (http://www.mscdirect.com/mscProductSearch.process?RestartFlow=t&RowsPerPage =15&searchmanufpartno=&dispmanufpartno=&operator=A ND&QuickFlag=1&Merchant_Id=1&query=05273974&search _cat=5&x=7&y=5). They also have one 2-1/4" OAL (http://www.mscdirect.com/mscProductSearch.process?RestartFlow=t&RowsPerPage =15&searchmanufpartno=&dispmanufpartno=&operator=A ND&QuickFlag=1&Merchant_Id=1&query=85321081&search _cat=5&x=6&y=5) You will need a collet adapter for them. See this post (http://www.talkshopbot.com/forum/cgi-bin/discus/show.cgi?tpc=29&post=13235#POST13235).