Looking for a material

[pezsez]

Looking to do a bunch of signs to give to our retail dealers. Was wanting a black rigid plastic around 3/8 to 1/2" thick with a thin layer of aluminum on top.

Im sure we can glue this up with some kind of laminate, but was wondering if there was a pre made product any of you know about. We have been doing the current signs from solid maple and staining, but for time reason looking for a cool material that comes off the bot pretty much ready to ship. Need to do about 800 of them

Thanks--PEZ

[mmccue29]

Poly-metal

[jamesgilliam]

Either Poly-metal or Di-Bond should do the trick.

[fmihm]

Nudo Poly-Metal, polyethylene core with white finished 0.015" aluminum skins, to 1/2" thick

Nudo Nu-Aluminum, with white finished aluminum skins, to 1" thick ???

Not sure about the available thicknesses
========================================
Alucobond Alusuisse Composites Alucobond, Two sheets of .020-in. aluminum with a thermoplastic core

Alucobond Alusuisse Composites Dibond, Two sheets of .010-inch aluminum bonded to a thermoplastic core

D-Lite, high-gloss white .012-inch aluminum on two sides of water-insensitive, corrugated CPA plastic core

Alucobond Alusuisse Composites EconoLite, Aluminum-faced corrugated plastic sheet