oddcoach
10-04-2006, 09:04 AM
Hi all
I have a job to cut a logo and some letters out of 18 lb signfoam. It is an interior application.
I need to put studs in the back to fasten it to the wall( sheetrock). I was going to make a drilling template out of 1/4 inch plywood. My question is what kind of glue do I use to secure the studs to the foam, or do i put the studs in the drywall and just push the letters on after. I know I would need to drill pilot holes in the foam for the latter method. there is no background to the sign.
thanks
John
I have a job to cut a logo and some letters out of 18 lb signfoam. It is an interior application.
I need to put studs in the back to fasten it to the wall( sheetrock). I was going to make a drilling template out of 1/4 inch plywood. My question is what kind of glue do I use to secure the studs to the foam, or do i put the studs in the drywall and just push the letters on after. I know I would need to drill pilot holes in the foam for the latter method. there is no background to the sign.
thanks
John