richards
04-26-2005, 06:09 PM
A new version of the "doors" program is semi-finished. This version allows one or two arches per door. The arches can be either top and bottom or side and side. I've labeled the program semi-finished because the v-cutter is doing a climb cut (that will be fixed in a few days).
Bruce Clark is working on the FreeDoors part that will make it all "usable". By the way, if any of you see Bruce at the Jamboree this week, congratulate him on his great efforts. If it weren't for him, you'd have to be nuts or a died-in-the-wool programmer to use the doors program.
As always, send me an email if you're interested. (The program is licensed as OSI software, which means that you can look at the source code to see how a really tired old man hacks code.)
Mike
miker@xmission.com (mailto:miker@xmission.com)
Bruce Clark is working on the FreeDoors part that will make it all "usable". By the way, if any of you see Bruce at the Jamboree this week, congratulate him on his great efforts. If it weren't for him, you'd have to be nuts or a died-in-the-wool programmer to use the doors program.
As always, send me an email if you're interested. (The program is licensed as OSI software, which means that you can look at the source code to see how a really tired old man hacks code.)
Mike
miker@xmission.com (mailto:miker@xmission.com)