Hinge Hardware

[stickman]

Hoping someone can direct me into the correct location. I am looking for a butt hinge. This hinge will fasten onto a shelf and a sign will hang from it. Behind the shelf there would be storage. The hinge holds itself open with a j-shaped clip on the front oof the sign and a angle shaped clip at the top of the hinge plate that attachs on the shelf. These are used on POP displays and such, storage behind the sign for either brochures or hardware

I've got a drawing done up for it. If you think you might be able to help out. E-mail me and I'll send you the drawing. DXF or JPG

[Brady Watson]

Jay,
You might want to try Rockler or Lee Valley for something like that.

-Brady

[m. holm (Unregistered Guest)]

While Rockler & Lee Valley do a good job marketing, they are typically 15 to 20 percent higher in cost than these guys. http://www.chbriggs.com/ They have almost amything you'll need & they don't charge an arm & a leg for shipping.

MH