Unit values

[woodworx]

Just re installed the 3.6.12. Solved one issue, but now my unit values are accurate when in move mode, but are off when jogging. Any ideas?

Justin

[srwtlc]

Justin, check the multiplier values below the unit values (VU). If you have an Alpha, I believe that they should be 5,5,5,5,1. I think that I had something like that happen to me some time ago and those values were wrong which made it jog slooowly.

[woodworx]

checked them. they are correct. I have the machine running a 3d file off my laptop right now. No problems at all. I will verify all values are consistent, and then call Frank on Monday......Cause he is awesome!