Log in

View Full Version : MDF Cabinet Door


jimmya
06-12-2009, 06:47 AM
How do I get the corners square on this MDF cabinet door.
Any help would be appreciated and thanks in advance
Jimmy

6943
cabnet636
06-12-2009, 06:59 AM
you may have to use a 1/8" bit set to run at the depth ot the top of the inside frame profile, with an atc this is common, it looks like you are running all three profiles with the same bit?

jim
dmidkiff
06-12-2009, 07:37 AM
Jimmy try Free Doors, it works great for me.
http://home.centurytel.net/bwclark/
dray
06-12-2009, 12:49 PM
use free doors...
http://home.centurytel.net/bwclark/
benchmench
06-12-2009, 01:53 PM
You can also V-Carve in Partworks or Aspire with a V-bit and a flat area clearance tool. You will probably have to limit the depth to 1/2 the thickness of your material.

6944