SbOdometer not working

[wberminio]

My Sbodmeter is not working.I get an error message "Runtime Error 9" Subscrip out of range

Any one know what is happening?

Thanks

Erminio

[angus_hines]

Looks like you may ahve overloaded a data array. Try restarting your computer and see if that helps.

[wberminio]

I tried that,Angus
I still get the same message

[bill.young]

Hey Erminio,

The first thing to do is to make sure you have the latest version from ShopBot Labs...there have been some fixes over the years including one for a subscript error:

http://www.shopbottools.com/LabFiles/odometer.htm

Also make sure that you have the "Write System Log" option set to "Write" in the VD command. Lastly it only records data from when the tool is in Cut mode, so if you use it on a design computer that has only been run in Preview mode there may be some issues (though it SHOULD just generate an empty report!).

If none of these are the problem, drop me an email and I'll see what I can do.

Bill

[wberminio]

Thanks Bill
I'll give it a try

Erminio