jsfrost
04-05-2005, 08:54 AM
Anybody need an LPKF Protomat CNC router similar to presently offered Protomat C60. (See http://lpkfusa.com) Includes plexiglass Doghouse enclosure, software (for PC like projects), manuals and a small collection of tiny bits. Cut area roughly 9 inches by 20 inches with depths to .250. I acquired when my employer closed shop and planned to adapt it to small woodworking projects. With no Forum, learning to use this for non PC work was impossible for me. The manual says it will run with HPGL or G code.
It's too good to throw away but is presently collecting dust. $400 and shipping. Or maybe the steppers become my homebrew indexer, but I don't need another project.
Jim
It's too good to throw away but is presently collecting dust. $400 and shipping. Or maybe the steppers become my homebrew indexer, but I don't need another project.
Jim