.06 end mill

[brian]

Who makes a .06 end mill with a cutting length of more than .2".

Brian

[bob_s]

One place to try is Precise bits.com

http://www.precisebits.com/products/carbidebits/precisebit-soft.asp
MM208-0625-031F is a .0625 dia .31 cut 1/8 shank under $10.

I have used this one with good results

[knight_toolworks]

also mcmaster carr and msc direct. mcmaster has up to 1" long

[brian]

thanks guys
I'd forgotten about precisebits(tinker & tinker)

Brian