kencraft
05-20-2009, 04:17 PM
I am still working on my vacuum table. I now have 2 regenerative blowers. One is 3 ½ hp with a 2” line, the other is 2.7 hp with a 1 1/2 “ line. My table is 60 x 96 and I have zoned it with 4 - 24 x 48 sections and 1 - 12" x 96". I have 6 valves layed out 2 in the long section. My question is do I hook them in a series so they work together.( or with the work against each other.) Or should I use 1 on one part of the table and the other on the rest. My thought was to use the 3 ½ hp on the four rectangular sections and the 2.7 hp on the long section at the edge. I am looking for the input from you guys. I can even look for more blowers if I need to.