Colombo spindle, Delta VFD, Pneumatic Drill For Sale

5hp Colombo spindle, Delta VFD. Completely rebuilt by Columbo two years ago. In service for less than one year before replacing entire system. Very much like new! This setup from Shopbot new is $4848, asking $1800.

Pneumatic drill: Gary Campbell built pneumatic drill and associated parts. Cost $1100 new asking $300.


http://www.talkshopbot.com/forum/att...id=26289&stc=1http://www.talkshopbot.com/forum/att...id=26290&stc=1http://www.talkshopbot.com/forum/att...id=26291&stc=1http://www.talkshopbot.com/forum/att...id=26292&stc=1

I would be interested in the drill if it is still avalable .

Thanks
Dave white

Dave,

Thank you for your reply. It is still available at this point. You can call 717-392-1736 and ask for Steve Schmucker.

Thanks!

Please let me know if you still have the drill for sale or was it sold already....

Thanks!

Is the spindle and VFD a 3 phase or single phase unit?

The spindle and VFD are 3 phase.

All items have been sold. Thank you for your interest.