Crucifix carving a work in progress

I was commissioned to carve a crucifixion for a church. It is being renovated so they gave me some of the old church pew wood for the carving, the wood is red Oak.

I decided before making the church one to do a practice run so I glued up some tulip poplar and made this one. It gets roughed out on the Shop bot I have a computer model I scanned years ago on the bot it was a small metal one. I used a pointed tig welder electrode mounted in the router with the z zero connected to the model

I finish it off by hand with die grinders and some little dremels with carbide burrs.

This one is almost done a little more work on the hands and feet.

A friend of mine who is a photographer took the pictures of me working.

https://i.ibb.co/CntDZTh/DSCN0231.jpg

https://i.ibb.co/KDJdC8H/DSCN0365.jpg

https://i.ibb.co/NC0SbRp/136484080-1...28717998-n.jpg

https://i.ibb.co/SVYhWQ5/135623235-8...45364897-n.jpg

It is just about finished I will be starting on the Oak one. I am going to make the cross for the poplar one out of cherry.

https://i.ibb.co/Ntn14v5/DSCN0396.jpg

https://i.ibb.co/mBVhqkr/DSCN0393.jpg

https://i.ibb.co/ZxPx940/DSCN0391.jpg

https://i.ibb.co/58s9p5z/DSCN0392.jpg

Very impressive work. Thanks for posting.

Phil

BEAUTIFUL work Brian!!

Boy, that bowling ball comes in Handy! :)
Nice pics....Thank you!
scott

Brian! WOW. That one is a wonderful creation! Your talent is showing! Keep posting, we love your work!

Thanks Guys, I will update as I progress. The oak one is machined and I will start the handwork tomorrow. Scott yes the bowling ball vise is one of my most used tools in the shop.

I suggest removing the debris and kindling from your shop before a fire destroys your building. One oily rag. One spark from a grinder. One overheated cord. Fire safety is not a part time job.

Nice job on the crucifix though.

Started the red oak one I think the grain is really going to pop once oiled, carves good with the carbide burrs.

Thanks for the advise John.

https://i.ibb.co/HrQLnFz/DSCN0409.jpg

Coming along NICELY Brian!!
scott

Did some repair work on a growing box of cheap dead die grinders they are a knockoff of the older Makita compacts of which I have 2 going on 30 years. The cords and switches are shot after about a year the mechanical components are robust, put a lot of hours on them with no other failures. Nice to have them lined up with different bits so I do not have to stop and change them. I do upgrade the cord and switch.

https://i.ibb.co/f8jkB7S/DSCN0412.jpg

And a few other pieces the dolphins are cherry the only shopbot involvement was cutting front and side plywood patterns, the horses were a 2d pocket cutout with 3d done by hand.

https://i.ibb.co/LxQV3bn/DSCN0327.jpg

https://i.ibb.co/VBRNnMc/DSCN0324.jpg

https://i.ibb.co/Px4gZVx/DSCN0322-001.jpg