Benchtop Modifications

I ran a search of the posts and found few if any upgrades to the PRT Benchtop. I know they are a little older machine but very capable and worth upgrading. I have made a few improvements as of late and thought I might share for the benefit of the other Benchtop owners or anyone looking to make the same changes. Two most useful upgrades: Router Mount and Echain.

I purchased a new router mount from K2 CNC, a big improvement over the hose claps that once held my router in place. I had to make a minor modification to compensate for the ¾ inch guide bearings but I am very happy with the outcome. Total cost for mount conversion- $70. (2 Hours)

The second was the replacement of the cable arch that was repaired several times for breakage. I purchased an EChain and mounting brackets from McMaster-Carr. I found some 4” track used in steal wall construction at H Depot (Less than $5 dollars for 12ft) and installed it as a support platform on the back of the unit. I used the original mounting hardware from the arch to attach the top mount of the Echain. Total cost of EChain conversion $140. (45min)

Brackets # 55835K124 Energy Chain #55835K593

I have included some pictures, hope this helps.


Attachment 256

Attachment 257

Attachment 258

Attachment 259

Attachment 260

Attachment 261

Robert,
Your '32' looks great! The mods look super. Thanks for posting. It isn't often people get to see a Benchtop machine...Many don't realize these are the older cousins to the Buddy tools.

-B

Thanks Brady,

This little bot has been a great machine, works hard, cuts clean and has taught me a great deal about CNC. There is always a learning curve when dealing with new machinery, lucky for me I was able to work through some of those issues without the worry of a monthly payment. This little bot has allowed me to see my true CNC needs; my next Shopbot purchase will be made based on these experiences. I don’t see much in the posts about the benchtops but these simple mods can be made to any bot that has the same basic set up. $200 in parts, and a little time made a big difference for me. Thanks again for the nice comments.

Attachment 262
This was a standard prt benchtop once.
It now does 1200 x 800 and is as steady as a rock.
R.

Pretty cool, Ralph!

-B

Ralph, nice machine! I have not seen one like that. It would be great if there was a place on the forum to share these machines. I am sure there are allot of older bots out there still working hard with owners willing to share. Nice to see a little history of the company and of the machine. This may also encourage others to ask questions or to find the inspiration to start a restoration. I know I would be interested in seeing more. Thanks for sharing.