Printable View
CabinetPartsPro has an update and can be downloaded http://www.cabinetpartspro.com/download.htm
After you have had time to use Cabinetparts and would like to have more options please let me know.
After installing version 4.7.0 and fill in the settings you will get a message saying there is a problem with your settings.ini click yes and CabinetParts will update your settings, then restart CabinetParts. You will also get this message if you do not uninstall older versions.
CabinetPartsPro has an update and can be downloaded http://www.cabinetpartspro.com/download.htm
Update includes: version 4.8.2
Label Printing option to remove label sets
The cut “all” file is now portable. The files directory is not included in the FP command. As long as the files exist in the same directory as the files in the “ALL” file it will work. If you are using Cabinetparts to start Shopbots software and have not allowed CabinetParts to change the shopbot.ini file. CabinetParts will send the FS command to Shopbots control software will open and then close. CabinetParts will send the FS command again when opening a cut file from a different directory. If you have allowd CabinetParts to change shopbot.ini file it will change the FS setting .
Added a cut timer on the ShopBot Control page. Timmer will start when the ShopBot control page is opened showing idel time. Once you have opened a cut file from within CabinetParts the idel time will stop and will start a timer for cutting time. Cutting time will stop counting when ShopBots control software has been closed. You can set in the settings to have Shopbots software to open and start cutting without any promts and close ShopBot software when done cutting.
Fixes:
Fix for Cut/Paste from sheet to grid
Fix run time error when canceling open part editor
You can Email me at coastalcarpentry@cabinetpartspro.com
Just a note to everyone; Ryan is going to be giving a demo of Cabinet Parts Pro at the Winter Garden, FL Camp Shopbot ,Sat. Feb. 4th. Details regarding the Camp are in another thread...
CabinetPartsPro has an update and can be downloaded http://www.cabinetpartspro.com/download.htm
After you have had time to use Cabinetparts and would like to have more options please let me know.
The G Code has not been updated Cabinetparts will export layouts to DXF and to Shopbot part files.
Update includes: version 5.0.0
Changed the Save Tool path page.
Larger text box for added to a cut file.
Changed the multi pass. You can select how many passes to make and it gives you the option to change
the depth of each pass. Example if you are cutting ¾” you can cut one pass at -.6875 and a final pass at –
.75. It will cut all the parts at the first depth the cut all the parts at the next depth.
…Added an option for a second Z axis with offsets. It will drill holes with a MA command.
You can select the order of the parts in the “ALL”file on the ToolPath page. There is a list of all the operations need for the job you are cutting. The order the list is in is the order the parts are in the “ALL” file. To change the order left click on the operation you need to change hold the mouse button down and move the mouse up or down. When the mouse icon is where you what the order to be release the button an it will be reordered.
If you do not want to have a cutting file for on of the operations in the list right click and select remove. It is put in the in the drop down box above the list. If you would like to have it cut once you have removed it from the list select it in the drop down box and it will be added to the list again.
When you select an operation in the list the text box next to “Insert before” will display the operation in the list. Then what ever you type in the larger box will be inserted in the “ALL” file before it uses the FP command to call the file selected in the list.
The drop down box below the Insert before has a list of Shopbot part files that are located in the special parts folder in settings ShopBot tab. Clicking on one of these file will be added to the text box with the Fp command.
The biggest Change in this update is it will allow me to easily add new options.
In the next few weeks I will start adding all the options that where suggested.
Some of the suggested option that will be added are:
Toe kick notch
Starter holes for those use screw to assemble
Selective shelf hole drilling Will drill a set of holes every so many inches
Cam lock holes for assembly (similar to the way Home Depot has on the Knock down cabinet)
Option to use a true 32mm system
Part rotation
Fixes:
Please let me know if you find something that needs to be fixed
You can Email me at coastalcarpentry@cabinetpartspro.com
Cabinetparts now has an option for Shopbots air drill. Under settings ShopBot Tab enter in your tool offset (router to drill) then put a check in the box for "Use offsets in drilling files" and then select "air drill" or "2nd Z". CabinetParts will insert "C8" when it needs to drill. I do not have the air drill so I can not test it if it is not working correctly please let me know if it is correct thank you.
Ryan
CabinetParts Update
CabinetParts will now put a toe kick notch. In the free version the toe kick settings can not be changed. In the pro version in settings cabinets tab you can set the toe kick height and depth of the notch.
Cabinetparts Update.
The part optimizing has been improved. It will give the best fit in most cases. When you first go to the layout page click tools/Nest Parts. It is a little slow to start and can take about 3 min. to nest 70 parts. You will see the layouts page caption change when it starts to layout a new sheet. After I speed the nesting up I will add an option to rotate the parts for a better fit. You can download the update here http://www.cabinetpartspro.com/download.htm
Cabinetparts Update
Version 5.3.3
The MDF doors is now working in this version. If you need any help with the MDF doors you can Email me at coastalcarpentry@cabinetpartspro.com The Extra parts has been relocated to the type cab drop down box. When you select the extra from the drop down box you can enter the part dimensions in the height and depth boxes to add a single part. The dimension entered in the height box is parallel to the X axis. You can download the update at http://www.cabinetpartspro.com/download.htm
CabinetPartsPro has an update and can be downloaded at http://www.cabinetpartspro.com/downloads.htm
www.cabinetpartspro.com has a new look and a quick start page to help you get started using CabinetParts.
Version 6.0.4
Added a 3D rendering for cabinets entered.
Change in Type cab list.
Changed the Cabinet list: (better organized) To remove parts for a cabinet, double click the Cab no. in the cabinet list. When you click a Cab no. in the cabinet list, the 3D view will show this cabinet and the dimensions for this cabinet are entered in the cabinet entry boxes.
Print nested layouts ( free version will only print the first two sheets)
Improved the speed of the nesting
Fixes:
build options with back the same size as box
Space between parts when nesting.
Please let me know if you find something that needs to be fixed
You can Email me at coastalcarpentry@cabinetpartspro.com
CabinetPartsPro will have special Jamboree pricing. $150.00 Starting now through May 5,2006. The price after May 5 will be $250.00. I will be at the Jamboree, if you have any question look me up.