Printable View
My drill isn't a stock unit and I still have that problem. As far as I know you're stuck unless you either have a wider machine (5x10) or you mount the drill next to your spindle (on Y) instead of to the left (on X). If you mount it on Y you're not going to be able to drill everywhere on the table.
This new shoe I made actually works awesome. It's far easier and faster to print too. I'll clean up the files and post them soon.
That sounds great. I did originally think about turning the shopbot unit sideways on my 5 x 10 but that would make me loose some cutting area.
Yeah, you can't do that on a 4x8 at all... It looks like you can until you realize you'll smack it into the legs.
https://www.dropbox.com/sh/zt4spy50u...XxG0AbLTa?dl=0
There's the updated STLs for the latest dust shoe (the last one I posted pictures of)
It's only three parts. All of the hardware you used for the other one can transfer to this one, including the magnets. That McMaster strip brush snaps right in too.