-
Depends on cut Kyle, but cherry/VCarved font for instance/60Vbit-50%Diameter pass depth/ 1.1,.5,14K almost never get tear-out or noticeable deflection. If making a bunch then a I make a 1Diameter depth speed pass at about 1.6,1,15K. If just 1 then I'll just RR to pretty much eliminate sanding.
Surfacing with a 1.25" mortising bit .02-.03" passes I'll do 3.6 IPS.
Cutout with the Onsrud starer set .25"LH, 1/2Diameter passes at 2.6,.5,12.5K.
Play!:) Don't Know about 5.5"Z ones but my Z-upgrade kit is supposed to arrive today according to the tracking. :)
-
What does (1.1,.5, 14k) mean?
14k is rpm but not sure on the rest.
-
Sorry Kyle, 1.1(X,Y Move speed in IPS), .5 (Z Move/plunge speed in IPS),14K (14 Thousand). AH! Last cut just finished:)
-
-
1 Attachment(s)
-
I know we are just looking at the signs but I can see the smiles on the students faces reflecting back! Well done teach! :) Russ
-
Desktop or full size Kyle? How do the kids take to the Desktop by the way?
What Russ said! :)
-
Used both bots 60 v-bit in the desktop and 90 v-bit in the big boy.
They like having the desktop to run while the big one is working.
-
1 Attachment(s)
-
1 Attachment(s)
