Printable View
I recently had an inspector pop by my shop to take a look at my recent addition of a spray booth. All well... till he spotted the control box and VFD for my new to me Alpha.
His only question. "Where are the CSA stickers on it?"
My answer. "No idea"
His reply. "That is a problem"
Has anyone run into a similar situation?
Are all the sub components simply CSA approved, but not the machine as a whole?
It sounds to me like just another government bureacrat flexing their authority. The only thing that ultimately change is if you get some type of sticker on there.
Will that sticker somehow make it more magically safe? No...
Be looking for some type of shutdown notice in the mail soon.
Government regulations at it's finest....keep us informed of the hoops you have to jump thru.:rolleyes:
CSA get a sticker from a iron most electrical panel are not CSA approved
Techinal all electrical would need a sticker spindle etc
From reading, I don't think it's going to be a huge problem. phew!Quote:
Originally Posted by myxpykalix
As far as I can see, a few hundred bucks to have a specialized inspector to come out and slap a sticker on it. Small price to keep things running.
Luckily, I only have the controller at the moment. Rest of the machine is making its way to me, so no worry of a "raid".
By chance, if anyone does have some CSA information feel free to add. I'll be back in my shop tomorrow to look for any stickers I can on the components.
Screw that...save your $200.Quote:
Originally Posted by Sk8MFG
I had an inspector one time come in and try to get me to get everything in the shop inspected...old drills, hand tools everything. I never did. I got my own CSA designation and never got Ontario Hydro back into my shop.Shopbot controllers will be UL or CSA approved I am sure. Just contact SB and they will no doubt set you up with the proper sticker. You cannot jut take one off an iron because they have numbers and doing that would be illegal.
When he comes back don't let him into the shop, show him the controller at your counter.
Its a joke about the iron
But not all all tools are CSA approved they are reaching .There no real way to even check on 15 year old tool if its CSA approved .There no serial number with sticker issued it can be a very grey area .
It come down to the electrican if hooks it up and is approved by Ontario inspector you have approved inspection CSA doesn't come in to play .I went through this when I open up my shop with the electrical inspector I don't think I had one CSA sticker approved machine
Talk to the electrican who hooked up your machine
Just curios do you have an air make up unit with your spray booth ?
Hmmm, looks like my electrician and I have some brainstorming to do.Quote:
Originally Posted by kevin
Nope, no heat recovery.Quote:
Originally Posted by kevin
Haven't noticed any drop in temperature in the shop even during long sessions. Normally the booth isn't running for more than 20min/day.
http://city.milwaukee.gov/ImageLibra...SprayBooth.pdf
Here is what it takes to get a spray both approved in some citys it can be a real nightmare
But he or she approved the booth with out an air make up {is for a negative pressure in the building which can cause other problem wheter its 20 min a day 14 hr a day] .Sometimes it can be cofusing on what there after
I think you have a small problem they approved the booth that can be real problem
I work at an antique shop in Montreal after 10 years in the same locaton they came hard on him with proper exhuast and replacement air make up
cost 10,000 to comply
Ouch, that couldn't have been fun to upgrade.Quote:
Originally Posted by kevin
Hm, negative building pressure never really crossed my mind.
20 minutes a day just open a window a crack...Quote:
Originally Posted by Sk8MFG