I believe, and I might be very wrong, the compressors use oil to lubricate the compressor itself. Not pump oil thru the air lines. I use an oil/water separator just in case any oil gets thru. On...
Type: Posts; User: dlcw
I believe, and I might be very wrong, the compressors use oil to lubricate the compressor itself. Not pump oil thru the air lines. I use an oil/water separator just in case any oil gets thru. On...
I matched them up and the compressor exceeded what the ATC needs. I've been running for about 5 months with no problems. My cycle rate on the compressor, when running the CNC, is 4 minutes shut...
I bought a Home Depot 60 gallon compressor and it works fine. I had a 30 gallon and it was to small. I do have 1/2" line running from the compressor to the CNC. All my other tools run off 3/8"...