Hello
Using a 90° V-bit to cut through 3/4" birch ply in one pass is risky. For a single pass, a maximum stepdown of 1/8" to 1/4" is recommended to avoid bit breakage.
Consider using an end-mill...
Type: Posts; User: nolanmaris
Hello
Using a 90° V-bit to cut through 3/4"...
Hello
Using a 90° V-bit to cut through 3/4" birch ply in one pass is risky. For a single pass, a maximum stepdown of 1/8" to 1/4" is recommended to avoid bit breakage.
Consider using an end-mill...
